Canon PIXMA TS3320 Error Codes: Complete List and Fixes
The TS3320 shows errors as a short code on its small LCD, such as E05 or P07. On its own that code does not say much. Below is the full list for the TS3300 series (TS3320, TS3322, TS3325, TS3327, TS3329) with the matching support code, what it means and what to do.
In This Guide
TS3320 Error Code Table
| LCD code | Support code | Meaning (Canon) | What to do |
|---|---|---|---|
| E02 | 1000 | Out of paper | Load paper in the rear tray, press OK/Black |
| E03 | 1203, 1300 | Cover opened during printing / paper jam (rear tray) | Close the cover; remove jammed paper |
| E04 | 168A | FINE cartridge not installed | Install the cartridge |
| E05 | 1401, 1403, 1430, 1485 | Ink cartridge cannot be recognized | Color left, black right, correct numbers; replace if it persists. See E05 guide |
| E08 | 1700–1715 | Ink absorber is almost full | You can continue for now; plan service |
| E09 | 1890 | Shipping tape or protective material still attached | Open the cover and remove all tape/material from the holder |
| E11 | 4102, 4103 | Cannot print with current settings | Change paper/print settings and print again |
| E12 | 4100 | Specified data cannot be printed | Check the document or reduce its size |
| E13 | 1686 | Ink may have run out | Replace the cartridge |
| E14 | 1684 | Ink cartridge cannot be recognized | Install a compatible cartridge. See cartridge guide |
| E15 | 1682 | FINE cartridge cannot be recognized | Replace the FINE cartridge |
| E16 | 1688 | Ink has run out | Replace the cartridge |
| E23 | 3446 | IP address and subnet mask are conflicting | Check the IP settings or reset network settings (Setup 11) |
| E31, E37 | – | Failed in Wi-Fi setup | Press OK; restart the router and try again (for WPS, check router security) |
| E32 | – | Cannot find a wireless router during setup | Press OK and repeat Wi-Fi setup |
| E33 | – | Multiple routers trying to connect (WPS) | Wait about 2 minutes and repeat |
| E34, E36 | 3440, 3441 | Easy wireless connect failed | Repeat setup closer to the router |
| E38 | – | Cannot connect to the wireless router | Check Wi-Fi is on, correct SSID and password, restart router |
| E39 | 495A | Error communicating over Wi-Fi or in standby | Restart printer and router |
| E45–E51 | – | Network, internet or server connection errors | Press OK and try again later; check router settings |
| E52–E56 | – | Cloud registration / online service errors | Press OK; re-register the service |
| E57 | 2900 | Print head alignment sheet scan failed | Place the sheet correctly and rescan |
| E58, E59 | –, 2114 | Paper size not registered / does not match driver | Register the paper size and match it in the driver |
| E61–E65 | 3412, – | Scanning errors (failed, memory full, no original) | Check the original on the platen; lower resolution |
| P02, P03 | 5100, 6000 | Printer error | Turn off, check for jammed paper or objects in the printer, turn on; contact service if it returns |
| P07 | 5B00–5B15 | Printer error: ink absorber full | Service required. See 5B00 guide |
| P08–P29 | 5011, 5012, 5050, 5200, 5205, 5206, 6500, 6800, 6801 | Printer error | Turn off, unplug, plug back in and turn on; if not resolved contact a Canon service center |
Fixes for the Codes You Will See Most
E03 – paper jam or cover open
Pull jammed paper out slowly with both hands from the rear tray or the output slot. Do not force it. If nothing is visible, turn the printer off and open the cover to check inside. Load paper again and press the Black or Color button to resume.
E05 / E14 / E15 – cartridge not recognized
Canon’s TS3300 manual says the color FINE cartridge goes in the left slot and black in the right. Reseat both until they click and check the model numbers. Full steps are in our E05 guide.
E09 – tape still attached
Common on new printers. Open the scanning unit/cover and remove any remaining tape or protective material from the FINE cartridge holder.
E08 then P07 – ink absorber
E08 is a warning that the absorber is almost full; you can usually continue for a while. P07 (5B00 family) stops printing until the absorber is serviced. See our 5B00 guide for options.
TS3320 Wi-Fi Errors (E31–E39)
Most Wi-Fi codes appear during setup. Press OK to clear the code, restart your router, and run setup again near the router on the 2.4 GHz network. If you changed routers, reset network settings first (Setup 11). For connection problems after setup, see our Canon Wi-Fi guide and offline guide.
Frequently Asked Questions
- The ink cartridge cannot be recognized (support codes 1401, 1403, 1430, 1485). Check color is on the left, black on the right, both clicked in, with correct model numbers.
- A printer error with support codes 5B00 to 5B15: the ink absorber is full. Canon directs you to a service center.
- Shipping tape or protective material may still be attached to the FINE cartridge holder. Remove it.
- Press Setup until 11 appears on the LCD, then press Black or Color. This restores network settings to their defaults.
- Load plain paper, press Setup until 1 appears, then press Black or Color.
Sources checked for this guide: Canon TS3300 series Online Manual (error code table, operation panel, maintenance and reset sections) and Canon USA "LCD Error Codes - TS3320 / TS3322" article. Button names, menus and codes can differ between models and firmware versions, so check your own model's manual at ij.manual.canon if something does not match.